Table of Contents
Advertisement
The DACS Camera System
109
6.2.2
Ethernet Camera Driver Installation
Install the DACS Camera dongle into an available USB port on your computer.
Open Windows Explorer and open the VISION USB drive (this is the drive for your orange Vision
dongle). Open the folder named Camera, then open the folder named Sentech Ethernet camera. Double
click on either the file named StGigE-Package_x86.exe for 32 bit operating systems, or StGigE-
Package_x64.exe for 64 bit operating systems. If your computer asks if you want to run this file, click
on Yes or Run. This file will install the driver needed to run the Ethernet DACS Camera. Go through and
complete the installation for the Sentech Standard GigE Vision Camera. When finished, you will need
to reboot your computer for the changes to take effect.
Once your computer has rebooted, add a shortcut for the VisionTool4 (or VisionTool4.exe) program to
your desktop. Open the folder C:\Program Files (x86)\Vision Machine Tools 4. Right click on
VisionTool4, select Send to, then click on Desktop (create shortcut).
The shortcut created will look like this.
© 2015 Vision Engraving and Routing Systems
Advertisement
Table of Contents
