Vision VR48 4 Series User Manual page 208

208 Vision VR48 Series 4 Router User Manual
The tool path will be created. At this point, we are ready to send the job to the machine.
We only want to send the red tool path we created to the machine. There are several methods to
sending specific objects to the machine. In this example we "turn off" all colors except for the one we
want to cut. To do this, first, notice that on the right side of the Vision 9 window, there are two color
swatches. These represent the colors we have used in our drawing (Black and Red).
© 2015 Vision Engraving and Routing Systems