Vision VR48 4 Series User Manual page 277

Example Jobs 277
The objects were then ungrouped.
The jobs are now ready to send to the machine.
In this example, the vacuum table was used. The 0.015" Flex Cutter was installed and a depth of
0.015" (15 clicks) was set on the micrometer. The home position was set to the upper left (lower left on
VR48 machines) corner of the material. To send only the engraving portion, disable the red and cyan
colors by clicking on the color swatches on the right of the Vision 9 window while holding down the
CTRL key on your computer's keyboard.
© 2015 Vision Engraving and Routing Systems