Vision VR48 4 Series User Manual page 282

282 Vision VR48 Series 4 Router User Manual
Strength/Speed of Motor – The strength and speed of the motor will limit the materials that can
be cut and what feed rates you can cut at. The optional engraving and routing motors will cover
most all engraving/routing needs.
The NSK High-Frequency 50,000 RPM Engraving Spindle is perfect for deep engraving
o
into metals. The high RPM allows cutters to stay sharp much longer for increased
production and allows for much faster speed in engraving.
The 3.25 HP 18,000 RPM Router Motor is perfect for routing applications in all materials.
o
The Standard Engraving Head can work at speeds up to 18,000 RPM, is driven by the
o
Router Motor and can easily cut through plastics and woods.
The High Speed Engraving Head is capable of 30,000 RPM, is driven by the Router Motor
o
and can increase feed rates when engraving many materials.
© 2015 Vision Engraving and Routing Systems