Table of Contents
Advertisement
Step 3: Click on Network function in the top menu to setup your Wi-Fi network. The detailed
is described at Sec. 2.4.2.
Step 4: When Wi-Fi network configure has finished, please take off the Ethernet cable from
LAN port of ZA1002US-5.
After Login user will see the screen as above, and there are four maincategories in the top
menu, user can click on each category to extend detail items.
System
Network
Zwave
Logout
The various configuration menus are explained below. You can select various function listed
in the first line of web page display.
2.4.1 System
You can backup or flash firmware in this function. This function also providesreboot the
system for you.
Backup / Restore
You can click on "Generate archive" button on the screen to download a tar archive of the
current configuration files.
To restore configuration files, you also can upload a previously generated backup archive
here.
Flash new firmware image
You can upload a sysupgrade-compatible image here to replace the running firmware.
Login page
9
Advertisement
Table of Contents
