Deep Engraving Sign Foam; Example Job 6 - Deep Engraving - Vision VR48 4 Series User Manual

186 Vision VR48 Series 4 Router User Manual
7.2.2

Deep Engraving Sign Foam

In this example, a sign will be deep engraved using Sign Foam material. The techniques used with this
application are: creation of circles, fitting text to a path, logo creation, basic welding of objects, creating
a star, object alignment and centering, and tool path fills.
7.2.2.1

Example Job 6 - Deep Engraving

This example job will cover the creation of a sign made from Sign Foam. The background of the images
will be engraved, which will allow the text and graphics to remain at the surface level.
Beginning with a plate size of 8 inches x 8 inches in the Vision Expert 9 program, create three circles
using the Circle Tool.
The circles should be sized to 7.5 inches, 5.125 inches and 4.75 inches diameter, then centered within
the plate.
© 2015 Vision Engraving and Routing Systems