Table of Contents
Advertisement
The DACS Camera System
121
To set the Auto Find setting, highlight it in the menu, press the Enter button, then enter the value 0.2
using the Pendant's numeric keypad. Press Enter to save this setting.
Highlight Manual Find Setting and press Enter on the Pendant. Use the up or down Y arrow buttons on
the Pendant to select >> Jog Camera to Fid, then press Enter to save this setting.
To set the Camera Scale, first exit the Pendant's menu, then press the Go to Limits button on the
Pendant, then press Set Home and then Enter. Press the Menu button, highlight DACS and press Enter,
highlight Set Camera Scale and press the Enter button 2 times. The below screen should be seen at this
point. Press Enter one more time.
Using the X and Y Arrow buttons on the Pendant, jog the camera so that a fiducial marker can be seen
in the center of the DACS software screen, then press Enter on the Pendant.
© 2015 Vision Engraving and Routing Systems
Advertisement
Table of Contents
