Vision VR48 4 Series User Manual page 329

Creating Multiples and Serialization in Vision 9 Expert and Pro 329
NOTE - The above procedure is appropriate for applications using the nose cone and proximity sensor.
For applications where you have set the surface of the material and plan on setting the engraving depth
via a tool path depth, follow the below procedure to set a specific engraving depth for a specific color.
Setting Engraving Depth for a Specific Color - For Online Engraving Only
When sending graphics to the machine, it is possible to assign a depth to any color swatch, and
therefore all graphics of that color on the screen. On the bottom color swatch bar, hover the mouse
pointer over the black (P1) color swatch as shown. The Depth and Number of Passes assigned to this
color are displayed.
To modify this setting, double click on the color swatch. This will open the Edit Color window.
© 2015 Vision Engraving and Routing Systems