Vision VR48 4 Series User Manual page 174

174 Vision VR48 Series 4 Router User Manual
Cutting
After sending the engrave file to the machine, the Filter by Color window will re-appear, signaling that
the software is ready for you to send another file to the engraver. Since we need to change the material
setting, select Stop Cutting.
To change to the material setting for cutting, select Engrave from the top toolbar menu, then Tool
Options.
Select Engravers Plastic(Cutting) from the Material drop down list, then select OK.
© 2015 Vision Engraving and Routing Systems