Setting Up The Dacs Camera System 2; Machine Tools Installation - Vision VR48 4 Series User Manual

108 Vision VR48 Series 4 Router User Manual
6.2

Setting Up the DACS Camera System 2

6.2.1

Machine Tools Installation

Install Vision Machine Tools - The VISION USB drive (or orange dongle used with the Vision software)
contains a folder named Vision Machine Tools v4. Open Windows Explorer and open this folder and
double click on Setup (or Setup.exe) to install Vision Machine Tools.
You may also download the newest version of Machine Tools from www.visionengravers.com in the
Support, Download Software, Drivers and Utilities page.
Once Machine Tools is installed, go to the folder named Dongle74 on your computer. It is located in C:
\Program Files (x86)\Vision Machine Tools 4\Dongle74. Double click to run the file named Dongle74 (or
Dongle74.exe) inside this folder. This file was installed with the Vision Machine Tools software in the
previous step. NOTE - The location of this file may be different on your computer depending on which
version of Windows you are using. You can run a search for "Dongle74.exe" on your computer to find
the file.
© 2015 Vision Engraving and Routing Systems