Table of Contents
Advertisement
Example Jobs
207
The Male path window will appear. In this example, since we are cutting completely through a piece of
11 Gauge aluminum, we will be using a 1/4" End Mill as the cutting tool. Set the Depth to slightly more
than the material thickness. In this case, the material actually measures 0.091 inches thick. We will set
the cutting depth to 0.100 inches and choose the proper tool for this application. Set the color to a
different color than what was used to draw the original text, in this case, Red is chosen. Then click on
the
icon to the right of the Depth field in order to set the number of passes.
Set the number of passes to 2. The other fields, except the Depth field, will adjust to equal depths per
pass. Click on OK when finished.
© 2015 Vision Engraving and Routing Systems
Advertisement
Table of Contents
