Installing The Drag Link Assembly - TOHATSU M 60C Owner's Manual

30
INSTALLATION

5. Installing the drag link assembly

(Standard accessories for EPTO and
EPO types)
Incorrect or unstable installation of
the Drag Link assembly can result
in accidents while riding the boat or
breakage of the hull.
Installation of the Drag Link Assembly
3
by your dealer is highly recommended.
Note
Depending on the steering cable
manufacture, spacers (optional) may
be required.
Spacer (optional)
Apply grease inside the bracket bolt
Nut
Washer
Collar
Washer
Bolt
Drag link rod
1 Connect the Drag Link rod to the tip
of the steering cable.
Tighten the rod using the nut with
nylon-stopper, making sure the rod
can swing freely.
2 Connect the other tip of the rod to
the steering bracket with a bolt, first
applying a collar and washer. The
bolt head must face downward.
Note
Apply grease in required places.
Steering bracket
Tip of cable
Washer
Nut with nylon-stopper
Seal Ling
Grease