Installation Of Compressor Housing Ass'y - TOHATSU MD 70-90C2 Service Manual

Fuel System (TLDI)

11) Installation of Compressor Housing Ass'y

Attach dowel pins 2 to compressor cylinder 1.
1.
Install compressor housing ass'y 3 and gasket by using
2.
bolt 4.
Put crank pin into connecting rod big end and
install the assembly while shaking crank shaft a
little.
Compressor Housing Bolt 4 :
6N·m (4 lb·ft) [0.6kgf·m]
Install head 5, reed valve ass'y 6 and gasket 7 by using
3.
bolt 8.
Be careful of the orientations of reed valve ass'y
and gasket when installing them.
Degrease both mating faces of compressor head
gasket and valve seat gasket before installing
them.
Cylinder Head Bolt 8 :
9N·m (7 lb·ft) [0.9kgf·m]
4-38
3
7
6
7
5
8
TLDI 75/90C2 2010
4
2
1