Show Ip Traffic - Allied Telesis AT-x230-10GP User Manual

IP A P
DDRESSING AND ROTOCOL

SHOW IP TRAFFIC

show ip traffic
Overview Use this command to display statistics regarding IP traffic sent and received by all
interfaces on the device, showing totals for IP and IPv6 and then broken down into
sub-categories such as TCP, UDP, ICMP and their IPv6 equivalents when
appropriate.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip traffic
Syntax
Mode Privileged Exec
Example To display IP traffic statistics, use the command:
awplus#
Output Figure 18-6: Example output from the show ip traffic command
C613-50104-01 REV A
C
OMMANDS
show ip traffic

IP:
261998 packets received
261998 delivered
261998 sent
69721 multicast packets received
69721 multicast packets sent
23202841 bytes received
23202841 bytes sent
7669296 multicast bytes received
7669296 multicast bytes sent
IPv6:
28 packets discarded on transmit due to no route
ICMP6:
UDP6:
UDPLite6:
TCP:
0 remote connections established
40 local connections established
7 remote listening ports
7 local listening ports
261 active connection openings
247 passive connection openings
14 connection attempts failed
122535 segments received
122535 segments transmitted
14 resets transmitted
227 TCP sockets finished time wait in fast timer
Command Reference for x230 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
626