Setting The Skip Channel - Icom ID-51A Advanced Instructions

Previous view
13
SCAN OPERATION

■ Setting the skip channel

The channels set as "SKIP" or "PSKIP" skip channels
are skipped (not scanned).
See page 13-8 for details of clearing the skip set-
ting.
Push [M/CALL] one or more times to select the
q
Memory mode.
Rotate [DIAL] to select the memory channel to be
w
set as a skip channel.
Push [QUICK] .
e
Push D-pad( ) to select "SKIP" or "PSKIP," and then
r

push D-pad(Ent).
• OFF : Cancel the skip setting.
• SKIP : Skipped during a memory scan.
• PSKIP : Skipped during both VFO and memory scans.
D-pad
(Ent)
(�)
Push D-pad(Ent) to save the selection.
t
• The skip setting is set.
[DIAL]
13-12
Example: Set "SKIP" to Memory channel "009."
Rotate [DIAL] to select
the memory channel.
Push [QUICK] .
Memory channel
number
Push D-pad() to
select, then push
D-pad(Ent).
Push D-pad() to
select, then push
D-pad(Ent).
"SKIP" is set.