Record The Transmit And Receive Audio Into The Same File - Icom ID-51A Advanced Instructions

Previous view
11
VOICE MEMORY FUNCTION

■ Record the transmit and receive audio into the same file

The transceiver can record the transmit and receive au-
dio into the same file.
Push [MENU] to enter the Menu screen.
q
Push D-pad( ) to select the root item (Voice Memo),
w
and then push D-pad(Ent) to go to the next level.
D-pad
(Ent)
(�)
( MENU > Voice Memo > QSO Recorder > Recorder
Set > File Split)
Refer to the menu sequence show directly above
e
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
Push D-pad( ) to select "OFF," and then push D-
r
pad(Ent) to save.
• OFF : The transceiver records the transmit and receive
audio into the same file.
• ON : The transceiver records the transmit and receive
audio into each files.
The transceiver makes separate new files for
transmit and receive audio. (Default setting)
• When you set the RX REC Condition item to
"Squelch Auto," the transceiver records audio to
the new file when the squelch is closed.
( Voice Memo > QSO Recorder > Recorder set >
RX REC Condition)
Push [MENU] to exit the Menu screen.
t
NOTE: Even if you set File Split item to OFF, when
the recording file's content becomes 2 GB, the trans-
ceiver continues to record, but to a new file.
About the VOICE PLAYER screen when recording
into the same file
The VOICE PLAYER screen
shows information that is re-
corded first.
When the receive audio was
recorded first, the transmit
audio information is not dis-
played on the screen.
11-12