Icom ID-51A Advanced Instructions page 16

Previous view
2
USING A microSD CARD
Loading the saved settings file that are on the microSD card (Continued)
■
Push D-pad(Ent) to select the file, and then the "Keep
y
'SKIP' settings in Repeater List?" appears.
D-pad
(Ent)
(�)
Push D-pad( ) to select "YES" or "NO."
u
• When "YES" is selected, the skip settings of the repeater
list are retained. (p. 9-36)
Push D-pad(Ent), "Load file?" appears.
i
Push D-pad( ) to select "YES," then push D-pad(Ent)
o
to start the file check.
• While checking the file, "CHECKING FILE" and a prog-
ress bar are displayed.
!0 After checking, settings data loading starts.
• While loading, "LOADING" and a progress bar are dis-
played.
!1 After loading, "COMPLETED!" appears.
To complete the loading, reboot the transceiver.
2-10