Icom ID-51A Advanced Instructions page 218

Previous view
14
PRIORITY WATCH
■ VFO scan and a priority channel
Checks the selected priority channel every 5 seconds,
during a VFO mode scan.
1. Set the priority channel
• In case of the Memory channel
q Push [M/CALL]
w Rotate [DIAL] to select the Memory channel you
want to watch.
• In case of the Bank channel
q Push [M/CALL]
w Rotate [DIAL] to select the Bank channel you
want to watch.
How to select the Memory and Bank:
z In the Memory mode, push [QUICK]
x Push D-pad() to select "Bank Select," and
then push D-pad(Ent).
• The Bank list is displayed.
c Push D-pad() to select a desired bank and
then push D-pad(Ent).
• If "OFF" is selected, cancel the bank selection.
D-pad
(Ent)
(�)
• In case of the Call channel
q Push [M/CALL]
the Call channel mode.
w Rotate [DIAL] to select the Call channel you want
to watch.
2. Start the Priority scan
q Push [QUICK] .
w Push D-pad( ) to select "PRIO Watch," and then

push D-pad(Ent).
e Push D-pad() to select "ON" or "Bell."
• ON : When a signal is received on the priority
channel, the channel is automatically se-
lected.
• Bell : When a signal is received on the priority
channel, the "
VFO mode.
r Push D-pad(Ent) to start the Priority scan.
• The "PRIO" icon appears.
3. Start the VFO scan
q Hold down [SCAN]
w Push D-pad() to select the scan type, and then
push D-pad(Ent) to start the VFO scan (p. 13-5).
NOTE: Push [CLR]
to select the Memory mode.
to select the Memory mode.
.
one or more times to select
" icon is displayed in the
for 1 second.
to cancel both scans.
Example: Checks memory channel "490" every 5 sec-
onds, during a VFO scan.
14-8
Push [M/CALL]
then rotate [DIAL] to se-
lect the Memory chan-
nel.
Push [QUICK]
Push D-pad() to
select, then push
D-pad(Ent).
Push D-pad() to
select, then push
D-pad(Ent).
Hold down [SCAN]
for 1 second.
Push D-pad() to
select, then push
D-pad(Ent).
Blinks
Blinks
[DIAL]
Continued on the next page.
☞
,
.