Dgps Group Name Programming - Icom ID-51A Advanced Instructions

Previous view
10
GPS/GPS-A OPERATION
GPS memory operation
■
D GPS group name programming
You can program the name of each GPS group.
Push [MENU] .
q
Push D-pad( ) to select the root item ("GPS"), and
w
then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "GPS Memory," and then
e
push D-pad(Ent).
Push D-pad( ) to select the desired group to edit
r
its name.
Push [QUICK] .
t
Push D-pad( ) to select "Edit Name," and then push
y
D-pad(Ent).
The group name editing screen appears.
u
Rotate [DIAL] to select the first character.
i
• Selectable input characters are Upper case letters, Low-
er case letters, Numbers or Symbols.
• The selected character blinks.
• Push D-pad() to move the cursor backward or forward.
• While selecting a character, push [QUICK]
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
input mode selection window.
• A space can be entered in any input mode selected.
• Rotate [DIAL] counter clockwise to enter a space.
• Push [CLR] to delete the selected character, or hold
down [CLR] to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-7 for programming details.
Push D-pad( ) to move the cursor to the second
o
digit.
!0 Repeat steps i and o to enter a group name of up
to 16 characters, including a space.
!1 After entering the name, push D-pad(Ent).
(Continued)
to change
to open the
10-11
GPS MEMORY
screen
Select
Group name
editing screen
Character
type selection
screen
(Example)
When group name
is programmed as
"My Favorite."