Icom ID-51A Advanced Instructions page 303

Previous view
16
MENU SCREEN
Function items (Continued)
■
Key Lock
Function > Key Lock (Key Lock)
Select the key lock type when the Key Lock function is activated.
• Normal : All keys and dials except [SQL] and [VOL] are locked.
• No SQL: All keys and dials except [SQL] is locked.
• No VOL : All keys and dials except [VOL] is locked.
• ALL : All keys and dials are locked.
NOTE: Regardless of the setting, the [PWR], [PTT] and [MENU] (lock
function only) are still accessible when the lock function is activated.
PTT Lock
Function > PTT Lock (PTT Lock)
Turn the PTT lock function ON and OFF.
To prevent accidental transmissions, this function disables [PTT].
• OFF : Turns the function OFF.
• ON : Turns the function ON.
Busy Lockout
Function > Busy Lockout (Busy Lockout)
Turn the busy lockout function ON or OFF.
This function inhibits transmission while receiving a signal, or when the
squelch is open.
• OFF : Turns the function OFF.
• ON : Turns the function ON.
Time-Out Timer
Function > Time-Out Timer (Time-Out Timer)
To prevent accidental prolonged transmission, the transceiver has a time-out
timer.
The function inhibits continuous transmissions longer than the set time pe-
riod.
• OFF : Turns the function OFF.
• 1 to 30 min : The transmission is cut OFF after the set time period ends (1,
3, 5, 10, 15 or 30 minutes).
Active band
Function > Active Band (Active Band)
Allows continuous frequency selection of the operating frequency across all
bands using [DIAL].
• Single : The operating frequency can be selected within the current band.
• ALL : The operating frequency can be continuously selected.
NOTE:
When "Single" is selected, push
then select "BAND" for another band selection.
This setting is for the [DIAL] operation, so all frequencies will be scanned.
16-68
(Default: Normal)
to show the quick menu, and
[QUICK]
(Default: OFF)
(Default: OFF)
(Default: 5min)
(Default: All)