D Using The "Gateway Cq" (Gateway Call) - Icom ID-51A Advanced Instructions

Previous view
8
D-STAR OPERATION <BASIC>
"TO" (Destination) setting (Continued)
■

D Using the "Gateway CQ" (Gateway call)

The destination repeater is set in "TO" to call a station
through your local area (access) repeater, gateway
repeater, the internet and then to your destination re-
peater.
q Hold down for 1 second.
• The DR mode is selected.
Push D-pad( ) to select "TO" (Destination), and then
w 
push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Gateway CQ," and then
e

push D-pad(Ent).
• The REPEATER GROUP screen is displayed.
Push D-pad( ) to select the repeater group where
r
your destination repeater is listed, and then push D-
pad(Ent).
• Example: "11: Japan"
Push D-pad( ) to select the destination repeater,
t
and then push D-pad(Ent).
• Example: "Hamacho"
• "Hamacho" is displayed on "TO."
After selecting a repeater, you can select other re-
peater preset in your transceiver by rotating [DIAL].
Means this repeat-
er is programmed
as the 282th of the
690 repeaters on
the repeater list.
8-10
Example: Making a gateway CQ call to (Japan; Hama-
cho) from the "Hirano" repeater.
Completed