Icom ID-51A Advanced Instructions page 154

Previous view
10
GPS/GPS-A OPERATION
Transmitting GPS-A data (Continued)
■
8. Comment programming
Program your comment and transmit it with the GPS-A
position data.
The number of characters you can enter differs, de-
pending on the settings of data extension
altitude .
(p. 10-20)
Data Extension
Altitude
OFF OFF
OFF ON
Course/Speed OFF
Course/Speed ON
!7 Push D-pad() and D-pad(Ent) to select "Com-
ment."
D-pad
(Ent)
(�)
!8 Push [QUICK] .
!9 Push D-pad() to select "Edit," then push D-pad(Ent),
and then the comment editing screen appears.
@0 Rotate [DIAL] to select the first character.
• Selectable input characters are Upper case letters, Low-
er case letters, Numbers or Symbols.
• The selected character blinks.
• Push D-pad() to move the cursor backward or forward.
• While selecting a character, push [QUICK]
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
input mode selection window.
• A space can be entered in any input mode selected.
• Rotate [DIAL] counter clockwise to enter a space.
• Push [CLR] to delete the selected character, or hold
down [CLR] to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-7 for programming details.
• A character after " " would not be transmitted.
@1 After entering the comment, push D-pad(Ent).
@2 Push [MENU] to exit the Menu screen.
and
(p. 10-19)
The number of characters
less than 43 (Default)
less than 35
less than 36
less than 28
to change
to open the
Ending icon (Up to 28 characters
can be input)
10-22