About The Repeater List Default Values; D Opening The Default Repeater List - Icom ID-51A Advanced Instructions

Previous view
9
D-STAR OPERATION <ADVANCED>

■ About the repeater list default values

You can check the repeater list default values using the
supplied CS-51
cloning software
The ICF (Icom Cloning Format) file, including the de-
fault repeater list, can also be downloaded from the
Icom website.
http://www.icom.co.jp/world/support/download/firm/
index.html
If you open the downloaded ICF file with the CS-51,
the repeater list default values are displayed on the
screen.
To reset the programmed repeater list to the default,
write the ICF file to the transceiver using the CS-51*
or copy the ICF file to the microSD card*
write to the transceiver.
1
* See the CS-51 instruction manual when using the
CS-51.
* 2 See page 2-9 when using the microSD card.

D Opening the default repeater list

Start the CS-51.
q
• See the CS-51 instruction manual for how to install the
software.
Click [Open] to open the ICF file.
w
Click the [Repeater list] folder to show the default
e
repeater list.
Click
You can see the
default values of
the repeater list
on the CS-51.
.
1
,
2
, and then
9-44
When the ICF file is opened on the CS-51.
Double-
click
Select