Continue To Record Even If No Signals Are Received - Icom ID-51A Advanced Instructions

Previous view
11
VOICE MEMORY FUNCTION

■ Continue to record even if no signals are received

In the default settings, the transceiver records audio
only while receiving signals (the squelch opens).
If you want to continue recording even if no signal is
received, do the following steps.
Push [MENU] to enter the Menu screen.
q
Push D-pad( ) to select the root item (Voice Memo),
w
and then push D-pad(Ent) to go to the next level.
D-pad
(Ent)
(�)
( MENU > Voice Memo > QSO Recorder > Recorder
Set > RX REC Condition)
Refer to the menu sequence show directly above
e
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
Push D-pad( ) to select "Always," and then push D-
r
pad(Ent) to save.
• Always : Recording continues, even if no signals
are received.
• Squelch Auto : The transceiver records audio only while
receiving signals (the squelch opens).
Push [MENU] to exit the Menu screen.
t
11-11