Cable; Ci-V Information; Ci-V Data Setting; Dci-V Connection Example - Icom ID-51A Advanced Instructions

Previous view
17
OTHER FUNCTIONS

■ CI-V information

D

CI-V data setting

Set the ID-51A/E's address, data transferring speed
and transceive function. See page 16-70 for setting the
CI-V condition using the MENU list screen.
Function > CI-V
D CI-V connection example
The transceiver can be connected through an optional
CT-17 -
ci v level converter
RS-232C port.
The Icom Communications Interface-V (CI-V) controls
the transceiver.
Up to 4 Icom CI-V transceivers or receivers can be con-
nected to the PC.
See the CT-17 instruction manual for details of remotely
control a transceiver or receiver.
* Use the cable described at right. No received audio is heard
when the supplied control cable, coming with CT-17, is used
for the connection.

D Data format

The CI-V system can be operated using the following
data formats. Data formats differ depending on com-
mand numbers. A data area or sub command is added
to some commands.
Controller to ID-51A/E
q w e
FE FE 86 E0
FE FE E0 86
q w e
ID-51A/E to controller
*The reply messages from the transceiver are the command "FB" (OK)
or "FA" (NG).
to a PC equipped with an
r t y
Cn Sc Data area
Cn Sc Data area
r* t y
ID-51A/E
¡Connections (ID-51A/E side)
3.5(d)mm
*No speaker is necessary for the CT-17 side.
u
FD
FD
u
17-22
Power supply
9V∼15VDC
RS-232C

cable

CT-17
2-conductor 3.5(d) mm
plug must be used.
3-conductor 3.5(d) mm
plug must be used.
SP
SP GND
Less than 4.5(d)mm
I/O
personal
computer
GND
SP
I/O