Icom ID-51A Advanced Instructions page 215

Previous view
14
PRIORITY WATCH
VFO frequency and a priority channel (Continued)
■
4. During the Priority scan
Checks the selected priority channel every 5 seconds,
while receiving on a VFO frequency.
5. When a signal is received
• When "ON" is selected.
When a signal is received on the priority channel,
the channel is automatically selected.
The "PRIO" icon blinks on the screen.
- The scan pause timer and resume settings are the
same as for a normal scan. (p. 16-18)
• When "Bell" is selected.
When a signal is received on the priority channel,
a beep sounds and the "
screen.
" icon blinks on the
14-5
Example: Checks M-CH "490" while receiving on 145.800
MHz frequency.
Appears
Priority channel
Example: Checks Bank CH "D06" while receiving on
145.800 MHz frequency.
Appears
Priority channel
Example: Checks Call CH "C3" while receiving on 145.800
MHz frequency.
Appears
Priority channel
Example: In case of the Memory channel
Automatically selects the priority channel.
Remains the VFO mode.
Appears
Checks the Memory chan-
nel every 5 seconds.
Appears
Checks the Bank channel
every 5 seconds.
Appears
Checks the Call channel
every 5 seconds.
Blinks
Blinks