Dv Automatic Detection - Icom ID-51A Advanced Instructions

Previous view
9
D-STAR OPERATION <ADVANCED>

■ DV automatic detection

If you receive an FM signal during DV mode operation,
the "DV" and "FM" icons alternately blink to indicate the
received signal is FM.
When the DV Auto Detect function is turned ON, the
transceiver automatically selects the FM mode to tem-
porarily monitor the signal. (Default: OFF)
• Regardless of this setting, the "DV" and "FM" icons alter-
nately blink if you receive an FM signal during DV mode
operation.
Push [MENU] .
q
Push D-pad( ) to select the root item ("DV Set"),
w 
and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "DV Auto Detect," and then
e 
push D-pad(Ent).
Push D-pad( ) to select "ON."
r 
Push [MENU] to exit the MENU screen.
t
• When an FM signal is received in the DV mode, the "DV"
and "FM" icons sequentially blink, and the transceiver re-
ceives the signal in the FM mode.
When digital call sign squelch (DSQL) or digital code
squelch (CSQL) is selected, the transceiver does not
receive FM signals, even if this function is ON.
You can silently wait for calls from others.
<When an FM signal is received while in the DV mode>
• DV Auto Detect function: OFF
The "DV" and "FM" icons sequentially blink, but the au-
dio cannot be heard.
These icons alter-
nately blink
• DV Auto Detect function: ON
The "DV" and "FM" icons sequentially blink, and the au-
dio can be heard.
• • •
These icons alter-
nately blink
The audio cannot
be heard.
9-10
Thanks for the
nice QSO• • •
The audio can
be heard.