Icom ID-51A Advanced Instructions page 220

Previous view
14
PRIORITY WATCH
■ VFO scan and Memory/Bank scan
Sequentially checks the Memory or Bank channels ev-
ery 5 seconds during a VFO scan.
1. Start the Memory or Bank scan
• In case of the Memory scan
q Push [M/CALL]
w Hold down [SCAN]
e Push D-pad() to select the scan type, and
then push D-pad(Ent) to start the Memory scan.
(p. 13-9)
D-pad
(Ent)
(�)
• In case of the Bank scan
q Push [M/CALL]
w Hold down [SCAN]
e Push D-pad() to select the scan type, and
then push D-pad(Ent) to start the Bank scan.
(p.13-10)
How to select the Memory and Bank:
z In the Memory mode, push [QUICK]
x Push D-pad() to select "Bank Select," and
then push D-pad(Ent).
• The Bank list is displayed.
c Push D-pad() to select a desired bank and
then push D-pad(Ent).
• If "OFF" is selected, cancel the bank selection.
2. Start the Priority scan
q Push [QUICK] .
w Push D-pad( ) to select "PRIO Watch," and then

push D-pad(Ent).
e Push D-pad() to select "ON" or "Bell."
• ON : When a signal is received on the priority
channel, the channel is automatically se-
lected.
• Bell : When a signal is received on the priority
channel, the "
VFO mode.
r Push D-pad(Ent) to start the Priority scan.
• The "PRIO" icon appears
to select the Memory mode.
for 1 second.
to select the Memory mode.
for 1 second.
.
" icon is displayed in the
Example: Sequentially checks the memory channels ev-
ery 5 seconds during a VFO scan.
Continued on the next page.
☞
14-10
Push [M/CALL] .
Hold down [SCAN]
for 1 second.
Push D-pad() to
select, then push
D-pad(Ent).
Blinks
Blinks
Push [QUICK] .
Push D-pad() to
select, then push
D-pad(Ent).
Push D-pad() to
select, then push
D-pad(Ent).