D Setting Gps-A - Icom ID-51A Advanced Instructions

Previous view
10
GPS/GPS-A OPERATION
Transmitting GPS-A data (Continued)
■

D Setting GPS-A

Set to transmit in the GPS-A mode.
1. Setting GPS-A in the GPS TX Mode
q Push [MENU] .
w Push D-pad() to select the root item ("GPS"), and
then push D-pad(Ent) to go to the next screen.
D-pad
(Ent)
(�)
( MENU > GPS > GPS TX Mode > GPS-A(DV-A))
e Refer to the menu sequence shown directly above,
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
2. Unproto Address display
The default address should be used, and editing is not
recommended.
r Push D-pad() to select "Unproto Address," and then
push D-pad(Ent).
• The default setting is "API51,DSTAR*."
t Push D-pad(Ent) to return to the previous screen.
3. Setting Data Extension
Set the data extension of your station's course direction
and speed.
y Push D-pad() to select "Data Extension," and then
push D-pad(Ent).
u Push D-pad() to select "Course/Speed," and then
push D-pad(Ent).
10-19
Continued on the next page
☞