Repeater Group Name Programming - Icom ID-51A Advanced Instructions

Previous view
9
D-STAR OPERATION <ADVANCED>

■ Repeater group name programming

Push [MENU] .
q
Push D-pad( ) to select the root item ("DV Memo-
w 
ry"), and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Repeater List," and then
e

push D-pad(Ent).
Push D-pad( ) to select the repeater group you want
r 
to program the name.
Push [QUICK] .
t
Push D-pad( ) to select "Edit Name," and then push
y 
D-pad(Ent) to enter the group name edit mode.
Rotate [DIAL] to select a desired character.
u
• Selectable input characters are Upper case letters, Low-
er case letters, Numbers or Symbols.
• The selected character blinks.
• Push D-pad() to move the cursor backward or forward.
• While selecting a character, push [QUICK]
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
input mode selection window.
• A space can be entered in any input mode selected.
• Rotate [DIAL] counter clockwise to enter a space.
• Push [CLR] to delete the selected character, or hold
down [CLR] to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-7 for programming details.
Push D-pad( ) to move the cursor to the second
i
digit.
Repeat steps u and i to enter a name of up to 16
o
characters, including spaces.
!0 After entering, push D-pad(Ent) two times.
to change
to open the
9-38
Group name
edit mode
Shows the currently se-
lected character type
Character type
selection screen
Example:
"China" is programmed.