Icom ID-51A Advanced Instructions page 85

Previous view
8
D-STAR OPERATION <BASIC>
"TO" (Destination) setting (Continued)
■
D Using the TX History
The TX History stores the name and/or call sign of up
to 20 "TO" (Destination) settings which were used when
you made the calls.
NOTE: If you never transmit a call in the DV mode,
you cannot select "TO" (destination) from the TX His-
tory.
Hold down for 1 second.
q
• The DR mode is selected.
Push D-pad( ) to select "TO," and then push D-
w

pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "TX History," and then push
e 
D-pad(Ent).
Push D-pad( ) to select the destination, and then
r 
push D-pad(Ent).
• Example: "Dallas"
• "Dallas" is displayed on "TO."
You can add the TX HISTORY data to memory, or
delete it from there.
Push [QUICK]
➥
then push D-pad(

and then push D-pad(Ent).
on the TX HISTORY screen,
) to select the desired item,
Example: Select the "Melbourne" repeater in the TX
History.
The Sub name is dis-
played when a repeat-
er is selected.
8-13
"Dallas"
repeater's
call sign is
displayed.
Completed