Vox Delay - Icom ID-51A Advanced Instructions

Previous view
16
MENU SCREEN
Function items (Continued)
■

VOX Delay

Function > VOX > VOX Delay (VOX Delay)
Set the VOX Delay to 0.5, 1.0, 1.5, 2.0, 2.5 or 3.0 seconds.
The VOX Delay is the amount of time the transmitter stays ON after you stop
speaking before the VOX switches to receive.
VOX Time-Out Timer
Function > VOX > VOX Time-Out Timer (VOX Time-Out Timer)
Set the VOX Time-Out Timer to 1, 2, 3, 4, 5, 10 or 15 minutes to prevent an
accidental prolonged transmission.
To disable the function, set it to "OFF."
• OFF
• 1, 2, 3, 4, 5, 10 or 15 min : If a continuous transmission exceeds the set pe-
Headset Select
Function > VOX > Headset Select (Headset Select)
Select the headset type to be connected.
• HS-95 : Select when the HS-95 is connected.
• Other : Select when the HS-94 or HS-97 is connected.
CI-V Address
Function > CI-V > CI-V Address (CI-V Address)
To distinguish equipment, each CI-V transceiver has its own Icom standard
address in hexadecimal code.
The ID-51A/E's default address is 86.
When 2 or more ID-51A/Es are controlled through a PC at the same time, set
a different address for each device between 01h and DFh (hexadecimal).
CI-V Baud Rate
Function > CI-V > CI-V Baud Rate (CI-V Baud Rate)
Set the CI-V data transfer speed to 300, 1200, 4800, 9600, 19200 bps or
Auto.
When "Auto" is selected, the baud rate is automatically set according to the
data rate of the controller.
16-70
: Turns the function OFF.
riod, the transmission will be cut off.
(Default: 0.5sec)
(Default: 3min)
(Default: Other)
(Default: 86)
(Default: Auto)