Icom ID-51A Advanced Instructions page 147

Previous view
10
GPS/GPS-A OPERATION
GPS memory operation
■
D GPS alarm setting (Continued)
Push [MENU] .
q
Push D-pad( ) to select the root item ("GPS"), and
w
then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "GPS Alarm," and then
e
push D-pad(Ent).
Push D-pad( ) to select "Alarm Select," and then
r

push D-pad(Ent).
Push D-pad( ) to select "RX," and then push D-
t 
pad(Ent).
• If you want to set the alarm to a specified GPS memory
channel, select "Memory," then push D-pad(Ent). And
then, select the channel in the GPS memory group.
y Push [MENU] to exit the Menu screen.
• When a set station is in the approximate 1 kilometer
range, GPS Alarm beeps once, and when it is in the ap-
proximate 500 meter range, beeps three times.
(Default: Both)
• When the GPS alarm beeps, "GPS ALARM" pops up on
the screen and then the S icon blinks.
• To cancel the GPS alarm, repeat step t and select
"OFF."
NOTE: When "RX" or a GPS memory channel is se-
lected , the GPS alarm sounds depend on
in step t
the "Alarm Area (RX/Memory)" setting in the Menu
screen. (p. 16-38)
(MENU > GPS > GPS Set > Alarm Area (RX/Memory))
NOTE: Even if "RX" is selected
received signal has no position, the GPS alarm does
not sound.
, and the
in step t
10-15
Example: Alarm Area (RX/Memory)
Alarm Setting is set to RX.
• GPS Alarm beeping screen
Blinks
"RX" is
displayed.
The pop up is displayed
and beeps sound, de-
pending on the setting
of the alarm area.