Icom ID-51A Advanced Instructions page 225

Previous view
14
PRIORITY WATCH
DR mode and a priority channel (Continued)
■
5. When a signal is received.
• When "ON" is selected.
When a signal is received on the priority channel, the
channel is automatically selected.
The "PRIO" icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When "Bell" is selected.
When a signal is received on the priority channel,
a beep sounds and the "PRIO" icon blinks on the
screen.
Example: In case of the Memory channel
Automatically selects the priority channel.
Remains the DR mode.
14-15
Blinks
Blinks