Save With A Different File Name - Icom ID-51A Advanced Instructions

Previous view
2
USING A microSD CARD

■ Save with a different file name

Push [MENU] .
q
Push D-pad( ) to select the root item ("SD Card"),
w 
and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Save Setting," and then
e 
push D-pad(Ent).
Push D-pad( ) to select "<<New File>>," and then
r

push D-pad(Ent).
• The FILE NAME screen is displayed.
Push [CLR] to delete the previously programmed
t
character.
• Push [CLR] to delete the selected character, symbol
or number.
When the cursor does not select a character, the previ-
ous character is deleted.
If [CLR] is held down, all the characters are delet-
ed.
Rotate [DIAL] to select a desired character.
y
• The selected character blinks.
About text entry
• Push D-pad() to move the cursor backward or forward.
• While selecting a character, push [QUICK]
the character to a upper case or lower case letter.
• While selecting a digit, push [QUICK]
put mode selection window.
- Push D-pad() to select the desired Upper case let-
ters, Lower case letters, Numbers or Symbols.
- To enter symbols, select "!"#," and then push D-pad(Ent)
to open the symbol character selection window. Rotate
[DIAL] to select the desired symbol character, and then
push D-pad(Ent).
• Move the cursor, then rotate [DIAL] to insert a character.
• A space can be selected in any input mode selected.
• Push D-pad() to enter a space.
• If you make a mistake, push [CLR]
lected character, or hold down [CLR] to continuously erase
the characters, first to the right, and then to the left of the
cursor.
☞
to change
to open the in-
to delete the se-
Continued on the next page
Input mode selection
2-7
window