D Setting A Tuning Step (Am Only) - Icom ID-51A Advanced Instructions

Previous view
6
BC RADIO OPERATION
Basic operation (Continued)
■

D Setting a tuning step (AM Only)

If you select the BC Radio frequency by rotating [DIAL]
in the Tuning mode, the frequency changes in the se-
lected tuning step.
Push [MODE] to select the AM mode.
q
Push [QUICK] .
w
Push D-pad( ) to select "TS," and then push D-
e
pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select the desired tuning step be-
r
tween 1.0 kHz, 9.0 kHz and 10.0 kHz.
Push D-pad(Ent) to save, and exit the Quick Menu
t
screen.
The frequency changes in the
selected tuning step.
6-8
When 10.0 kHz
step is selected.