Listening To The Bc Radio While Monitoring Two Ham Bands; D Mode Selection - Icom ID-51A Advanced Instructions

Previous view
6
BC RADIO OPERATION
Basic operation (Continued)
■
D Listening to the BC Radio while monitoring two ham bands
When the transceiver receives 2 amateur bands on the
MAIN band and SUB band, you can still listen to the
BC Radio.
Push [QUICK] .
q
Push D-pad( ) to select "<<BC Radio ON>>," and
w
then push D-pad(Ent).
• " " appears.
D-pad
(Ent)
(�)
Push [CLR] to turn OFF the BC Radio pop up
e
window.
• You can comfortably standby listening to the BC Radio.
NOTE: To show the BC Radio pop up window again,
push [QUICK] , and push D-pad() to select
"<<BC Radio>>," then push D-pad(Ent).

D Mode selection

When the BC Radio pop up window is displayed,
q
push [M/CALL] to select between the Tuning
mode and the Memory bank mode.
Rotate [DIAL] to select the frequency or memory
w
channel.
• Tuning mode
The BC Radio Tuning mode is used to set the desired
BC Radio frequency.
To save the selected frequency, hold down [S.MW]
for 1 second to program into the lowest memory chan-
nel of the selected bank.
• Memory bank mode
The BC Radio Memory bank mode is very useful to
quickly select often-used frequency settings.
When the Memory bank mode is selected, "
the selected memory channel number appear.
NOTE: Push [QUICK]
lect the Tuning mode, or select "MR" to select the
Memory bank mode.
" and
, and select "VFO" to se-
Appears
To show the BC Radio
pop up window again,
select "<<BC Radio>>."
6-3
BC Radio pop
up window
BC Radio pop up
window is OFF
(BC Radio is ON)
Tuning mode
Memory bank mode