Charging Through The [Dc In] Jack; D Battery Icon; D Charging Note - Icom ID-51A Advanced Instructions

Previous view
4
BATTERY CHARGING

■ Charging through the [DC IN] jack

Prior to using the transceiver for the first time, the bat-
tery pack must be fully charged for optimum life and
operation.
BE SURE to turn OFF the power while charging. Other-
wise the attached battery pack cannot be charged. (see
page 4-6 for details)
D Battery icon
While charging, the charging icon "
shows eleven level steps along with the word "Charg-
ing...".
The icon disappears when the battery pack is com-
pletely charged.

D Charging note

• When using the supplied BC-167S battery charger, be
sure to turn OFF the transceiver power. Otherwise the
battery pack will not be charged completely, or it will
take much longer to charge.
• When using an optional CP-12L, CP-19R or OPC-
254L, the battery pack can be charged at power ON.
But by default, the battery pack cannot be charged at
power ON, so you should turn OFF the power before
charging. (p. 16-71)
• Even if rechargeable batteries, Ni-Cd or Ni-MH, are
installed in the optional BP-273 battery case, they
cannot be charged.
• The battery pack can be charged approximately 500
times.
" sequentially
• Charging period: BP-271 approximately 3.0 hours
Turn power OFF
while
the battery pack.
BE SURE to attach the battery pack
before connecting the DC cable.
4-3
While charging
BP-272 approximately 4.5 hours
Transceiver
• BC-167S
• CP-12L (Optional)
to
[DC IN]
BP-271
• CP-19R (Optional)
charging
• OPC-254L (Optional)
to AC outlet
The BC-167SA,
BC-167SD and
BC-167SV have
different shapes.
to cigarette lighter
socket (12 V DC)
to 12 V DC
(power supply)
Black: _
White: +