Icom ID-51A Advanced Instructions page 153

Previous view
10
GPS/GPS-A OPERATION
Transmitting GPS-A data (Continued)
■
7. Setting SSID
To assist in identifying a station's type, the displayed
®
APRS based SSID is added after the GPS-A data call
sign.
The SSID's adding method differs, depending on
whether if you enter a space in your call signs or not.
!4 Push D-pad() to select "SSID," and then push D-
pad(Ent).
D-pad
(Ent)
(�)
!5 Push D-pad() to select SSID, and then push D-
pad(Ent).
• --- : Change the space in call sign to "-".
If the space is the last character, delete
the space instead of changing it to a "-".
Example: JA3YUA A  JA3YUA-A
• (-0) : No SSID. If you use a capital letter, it will
be deleted.
Example: JA3YUA A  JA3YUA
• -1 to -15 : Adds an SSID of -1 to -15 to your call
sign.
Example: "-9" is entered
• -A to -Z : Adds an SSID of -A to -Z to your call
sign.
Example: "-Z" is entered
!6 After setting SSID, push D-pad(Ent).
JA3YUA A  JA3YUA-9
JA3YUA A  JA3YUA-Z
About SSID
To assist in identifying a station's type, designated call
sign SSIDs are used in D-PRS (APRS
the common guideline.
The guideline may be changed when the infrastruc-
ture environment, such as a product or network, is
changed.
Please check the latest guideline in the web site re-
lated on the D-PRS or APRS
10-21
Continued on the next page
☞
® ), according to
® , and correctly set.