D Adjusting The Emr Af Level; Display Type Setting - Icom ID-51A Advanced Instructions

Previous view
9
D-STAR OPERATION <ADVANCED>
EMR communication (Continued)
■

D Adjusting the EMR AF level

The audio output level when an EMR signal is received
is adjustable between 0 and 39.
When an EMR signal is received, the audio will be
heard at the preset level, or the [VOL] control level,
whichever is higher.
To disable the setting, set it to
Push [MENU] .
q
Push D-pad( ) to select the root item ("DV Set"),
w

and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "EMR AF Level," and then
e 
push D-pad(Ent).
Push D-pad( ) to adjust the EMR audio output level
r 
between 0 (minimum) and 39 (maximum) in single
digit steps. (Default: 19)
Push [MENU] to exit the MENU screen.
t

■ Display type setting

The display size in the DR mode, such as a repeater
name, call sign, and so on, can be set to Large.
Push [QUICK] .
q
Push D-pad( ) to select "Display Type," and then
w

push D-pad(Ent).
Push D-pad( ) to select "Large," and then push D-
e 
pad(Ent).
• The display size changes to large such as the repeater
name set in "TO" and "FROM."
"0."
(Default: Normal)
9-9