Voice Tx Function; D Recording; The Recorded Voice Audio Playing Back - Icom ID-51A Advanced Instructions

Previous view
17
OTHER FUNCTIONS

■ Voice TX function

The Voice TX function transmits the recorded audio on
a microSD card once, or repeatedly, for up to 10 min-
utes at the specified interval.
Convenient!
✓
When the key function [Voice TX] is assigned to the key
on the optional HM-75LS
voice audio recorded onto the microSD can be trans-
mitted when the key is pushed.
NOTE: Be sure to insert a microSD card to the [mi-
cro SD] slot of the transceiver before starting to re-
cord a voice audio.

D Recording

Push [MENU] .
q
Push D-pad( ) to select the root item ("Voice TX"),
w 
and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Record," and then push D-
e 
pad(Ent).
Push [PTT] to start recording.
r
• After releasing [PTT], the recording is cancelled.
• Maximum record period is 1 minute.
• Hold the microphone 5 to 10 cm (2 to 4 inches) from your
mouth, then speak at a normal voice level.
• Only one announcement can be recorded. The current
contents will be overwritten if you record again.
Push [MENU] to exit the MENU screen.
t
D The recorded voice audio playing back
The recorded voice audio for the Voice TX function can
be played back.
Push [MENU] .
q
Push D-pad( ) to select the root item ("Voice TX"),
w

and then push D-pad(Ent).
Push D-pad( ) to select "Record," and then push D-
e

pad(Ent).
Push D-pad(Ent) to start the playback.
r
Push [MENU] to exit the MENU screen.
t
When no microSD card is inserted:
When no microSD card is in-
serted, this error message is
displayed.
- , the
speaker microphone
Information
✓
You can delete the recorded audio.
On the DV AUTO REPLY screen, push [QUICK]
➥
and then push D-pad(Ent).
17-2
While recording
Audio level is displayed
Recording time
is displayed
While playing back
,