Repeater Detail Screen - Icom ID-51A Advanced Instructions

Previous view
9
D-STAR OPERATION <ADVANCED>

■ Repeater detail screen

According to the programmed contents, such as posi-
tion data, UTC offset, and so on, the distance between
your position and the repeater or repeater time can be
displayed on the REPEATER DETAIL screen.
Hold down for 1 second.
q
• The DR mode is selected.
Push D-pad( ) to select "TO," and then push D-
w 
pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Gateway CQ," and then
e 
push D-pad(Ent).
Push D-pad( ) to select the repeater group, and
r

then push D-pad(Ent).
• Example: "11: Japan"
Push D-pad( ) to select the repeater, and then push
t 
D-pad(Ent).
• Example: "Hirano"
Push [QUICK] .
y
Push D-pad( ) to select "Detail," and then push D-
u 
pad(Ent).
• The REPEATER DETAIL screen is displayed.
Push D-pad(Ent) to return to the RPT LIST screen.
i
While in the DR mode, and if you set the repeater as
shown to the right, the repeater details screen can be
displayed.
Push [QUICK]
q
screen.
Push D-pad( ) to select "Repeater Detail," and
w

then push D-pad(Ent).
• The REPEATER DETAIL screen is displayed.
Repeater is set in "FROM"
to open the quick menu
"Repeater Detail" is selected
Example: Shows the "Hirano" repeater detail screen
Repeater
name
Sub name
Group
number
Direction from your position*
* When the position data accuracy level is set to "Approxi-
mate," direction data is not displayed if the distance to the
repeater is under 5 kilometers.
9-39
Call sign
Repeater
frequency
Duplex setting
Distance from
your position
Repeater time