Icom ID-51A Advanced Instructions page 341

Previous view
17
OTHER FUNCTIONS
Cloning function
■
D Transceiver-to-Transceiver cloning using a microSD
card (Continued)
3. Loads the setting data into the sub transceiver.
!2 Push [MENU] .
!3 Push D-pad( ) to select the root item ("SD card"),

and then push D-pad(Ent).
D-pad
(Ent)
(�)
!4 Push D-pad( ) to select "Load Setting," and then

push D-pad(Ent).
!5 Push D-pad() to select the desired setting file, and
then push D-pad(Ent).
!6 Push D-pad() to select the desired loading content,
as shown below.
• ALL:
• Except My Station:
• Repeater List Only: Loads only the repeater list into
!7 Push D-pad(Ent).
• The "Keep 'SKIP' setting in Repeater List?" appears.
!8 Push D-pad() to select "YES" or "No."
• When "Yes" is selected, the skip setting of the repeater
list is retained. (p. 9-36)
!9 Push D-pad(Ent).
• "Load file?" appears.
@0 Push D-pad() to select "Yes," and then push D-
pad(Ent) to start the file check.
• While checking the file, "FILE CHECKING" and a prog-
ress bar are displayed.
@1 After checking, settings data loading starts.
• While loading, "LOADING" and a progress bar are dis-
played.
@2 After loading, "COMPLETED!" appears.
To complete the loaded, reboot the transceiver.
Loads all memory channels, item
settings in the menu list and the
repeater list into the transceiver.
Loads all memory channels, item
settings in the menu list except
MY call signs and the repeater list
into the transceiver.
the transceiver.
17-19
Selecting the file which
is saved by the master
transceiver.
Select "ALL" when all
memory channels,
MENU item settings
and repeater list to
be copied.
Reboot the transceiver
to complete the clon-
ing/data loading.