Icom ID-51A Advanced Instructions page 112

Previous view
9
D-STAR OPERATION <ADVANCED>
Repeater list programming (Continued)
■
3. Repeater sub name programming
!2 Push D-pad( ) to select "SUB NAME," and then

push D-pad(Ent) to enter the repeater sub name edit
mode.
D-pad
(Ent)
(�)
!3 Rotate [DIAL] to select a desired character.
• Selectable input characters are Upper case letters, Low-
er case letters, Numbers or Symbols.
• The selected character blinks.
• Push D-pad() to move the cursor backward or forward.
• While selecting a character, push [QUICK]
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
input mode selection window.
• A space can be entered in any input mode selected.
• Rotate [DIAL] counter clockwise to enter a space.
• Push [CLR] to delete the selected character, or hold
down [CLR] to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-7 for programming details.
!4 Push D-pad() to move the cursor to the second
digit.
!5 Repeat steps !3 and !4 to enter a sub name of up to
8 characters, including spaces.
!6 After entering the name, push D-pad(Ent).
to change
to open the
9-25
Shows the currently se-
lected character type
Character type
selection screen
Example:
"Japan" is en-
tered.
☞ Continued on the next page.