Icom ID-51A Advanced Instructions page 284

Previous view
16
MENU SCREEN
Call sign items (Continued)
■
2. Gateway ("R2") setting
Push D-pad( ) to select "R2," and then push D-pad(Ent).
q 
Push D-pad( ) to select "GW," and then push D-pad(Ent).
w 
• When you manually enter the call sign, push
About the RPT2 SELECT screen
NOT USED* For local area call
GW To select the gateway call sign from the repeater list.
To select the repeater that has the same gateway as the "R1"
Repeater name
repeater.
3. Destination ("UR") setting
Push D-pad( ) to select "UR," and then push D-pad(Ent).
q 
Push D-pad( ) to select "Gateway CQ," and then push D-pad(Ent).
w 
Push D-pad( ) to select "11:Japan"(repeater group where your destina-
e 
tion repeater is listed), and then push D-pad(Ent).
Push D-pad( ) to select "Hamacho430," and then push D-pad(Ent).
r 
• When you manually enter the call sign, push
About the YOUR SELECT screen
CQCQCQ To select "CQCQCQ" to make a non-call sign specific call.
†
Gateway CQ To select "Gateway CQ" using the repeater list.
To select the destination ("UR") call sign using the Your Call Sign
Your Call Sign
memory.
RX History To select the destination ("UR") call sign using the RX History.
TX History To select the destination ("UR") call sign using the TX History.
† Not displayed in the Simplex mode.
16-49
in step q.
in step q.