Skip Channel Setting; Scan Operation - Icom IC-2820H Instruction Manual

8

SCAN OPERATION

■ Skip channel setting

The memory skip function speeds up scanning by checking
only those memory channels not set as skip channels. Set
skip channels as follows.
Skip indicator appears
q Select a memory channel in the desired band
➥ Push the desired band's [M/CALL•MW] to select mem-
ory mode.
➥ Rotate the same band's [DIAL] to select the desired
channel to be a skip channel.
w Push [F•
] to display the function guide.
ePush [SKIP](TONE•DTMF) to select the skip condition
from "≈," "P≈" or "OFF
nel.
• "≈" (SKIP) : The channel is skipped during memory or bank
scan.
• "P≈" (PSKIP) : The channel is skipped during memory/bank scan
and the programmed scan.
• "__" (OFF) : The channel is scanned during any scan.
rPush [F•
] once or twice to exit the function guide indi-
cation.
79
(Left or Right)
" for the selected chan-
(no indication)
: