Icom ID-51A Advanced Instructions page 60

Previous view
6
BC RADIO OPERATION
Adding or editing BC Radio memory
■
3. Frequency programming
!2 Push D-pad() to select "FREQUENCY," and then
push D-pad(Ent).
• A cursor appears and blinks.
D-pad
(Ent)
(�)
!3 Rotate [DIAL] to input the frequency.
• AM: 520 to 1710 kHz
• FM: 76.0 to 108.0 MHz
!4 Push  to move the cursor backward or for-
D-pad( )
ward to edit the frequency.
!5 Repeat steps !3 and !4 to enter the frequency.
!6 After entering, push D-pad(Ent).
4. Skip setting
!7 Push D-pad() to select "SKIP," and then push D-
pad(Ent).
!8 Push D-pad() to select whether or not to use the
channel in the BC Radio memory.
• OFF: You can select the channel in the BC Radio
memory.
• Skip: The channel does not appear in the BC Radio
memory.
!9 After selecting, push D-pad(Ent).
5. Writing BC Radio Memory
@0 Push D-pad() to select "<<Add Write>>," and then
push D-pad(Ent).
• If a previously added BC Radio memory is edited, select
"<<Overwrite>>."
@1 Push D-pad() to select "YES," and then push D-
pad(Ent).
To cancel the programmed data:
To cancel the programmed
q
data, push [CLR]
display "Cancel edit?."
Push D-pad( ) to select
w 
"YES," and then push D-
pad(Ent) to cancel pro-
gramming and return to
the BC Radio Memory's
channel list screen.
(Continued)
to
The list of BC Radio Bank K
is displayed.
6-11
(Example)
When entering
"88.9"
Select
(Example)
When "FM-K Station" is
programmed in Bank K.