Icom ID-51A Advanced Instructions page 245

Previous view
16
MENU SCREEN
Menu items and Default settings (Continued)
■
NOTE: The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
In this item, set infrequently changed values or functions in the DV mode.
DV Set
Tone Control
Auto Reply
DV Data TX
Digital Monitor
Digital Repeater Set
RX Call Sign Write
RX Repeater Write
DV Auto Detect
RX Record (RPT)
BK
EMR
EMR AF Level
RANGE OR VALUE (Default is shown in bold)
RX Bass Cut, Normal or Boost
Cut, Normal or Boost
RX Treble
RX Bass Boost OFF or ON
TX Bass Cut, Normal or Boost
TX Treble Cut, Normal or Boost
OFF, ON, Voice or Position
PTT or Auto
Auto, Digital or Analog
OFF or ON
OFF or Auto
OFF or Auto
OFF or ON
ALL or Latest Only
OFF or ON
OFF or ON
0~19~39
Sets the DV mode received audio bass filter
level to Cut, Normal or Boost.
Sets the DV mode received audio treble filter
level to Cut, Normal or Boost.
Turns the DV mode received audio Bass Boost
function ON or OFF
Sets the DV mode transmit audio bass filter
level to Cut, Normal or Boost.
Sets the DV mode transmit audio treble filter
level to Cut, Normal or Boost.
Selects the Automatic Reply function between
ON, OFF, Voice and Position.
Selects manually or automatically to transmit
low speed data.
Selects the DV mode RX monitoring when
[SQL] is held down.
Turns the digital repeater setting function ON
or OFF. This function is usable in any DV mode
except the DR mode.
Turns the RX call sign automatic write function
ON or OFF. This function is usable in any DV
mode except the DR mode.
Turns the repeater call sign automatic write
function ON or OFF. This function is usable in
any DV mode except the DR mode.
Turns the DV mode automatic detect function
ON or OFF.
The transceiver can record the data of up to 50
individual calls.
Turns the BK (Break-in) function ON or OFF.
The BK function allows you to break into a con-
versation between two stations with call sign
squelch enabled.
Turns the EMR (Enhanced Monitor Request)
communication mode ON or OFF.
After turning OFF the transceiver, the EMR
mode will be cancelled.
Sets the audio output level when an EMR mode
signal is received.
16-10
DESCRIPTIONS