Icom ID-51A Advanced Instructions page 217

Previous view
14
PRIORITY WATCH
VFO frequency and a Memory/Bank scan (Continued)
■
4. During the Priority scan
Sequentially checks the Memory or Bank channels ev-
ery 5 seconds, while receiving on a VFO frequency.
5. When a signal is received
• When "ON" is selected.
When a signal is received on the priority channel,
the channel is automatically selected.
The "PRIO" icon blinks on the screen.
- The scan pause timer and resume settings are the
same as for a normal scan. (p. 16-18)
• When "Bell" is selected.
When a signal is received on the priority channel,
a beep sounds and the "
screen.
" icon blinks on the
14-7
Example: Sequentially checks the Memory channels while
receiving on 145.800 MHz frequency.
Appears
The Memory chan-
nels are sequential-
ly checked.
Example: Sequentially checks Bank channels while re-
ceiving on 145.800 MHz frequency.
Appears
The bank channels
are sequentially
selected.
Checks the Bank channel
every 5 seconds.
Example: In case of the Memory scan
Automatically selects the Memory channel.
Remains the VFO mode.
Appears
Checks the Memory chan-
nel every 5 seconds.
Appears
Blinks
Blinks