Memory Channel Selection; Selecting A Call Channel - Icom ID-51A Advanced Instructions

Previous view
12
MEMORY CHANNEL PROGRAMMING

■ Memory channel selection

The Memory mode is used for operation on memory
channels, which store programmed frequencies, call
signs and other data.
Push [M/CALL] one or more times to select the
q
Memory mode.
• " " appears when the Memory mode is selected.
• Push [M/CALL] again to select the Memory mode or
Weather channel mode*. The Memory mode, Call chan-
nel mode or Weather channel mode* are alternately se-
lected.
*Appears only for the U.S.A. version transceivers.
Rotate [DIAL] to select a desired memory channel.
w
• Only programmed memory channels can be selected.
• See page 12-4 for memory programming details.

■ Selecting a call channel

Call channels are used for quick recall of most often-
used operating settings.
Push [M/CALL] one or more times to select the
q
Call channel mode.
• Push [M/CALL] again to select the Memory mode or
Weather channel mode*. The Memory mode, Call chan-
nel mode or Weather channel mode* are alternately se-
lected.
*Appears only in the U.S.A. version transceivers.
Rotate [DIAL] to select the Call channel between
w
"C0" to "C3."
[DIAL]
[DIAL]
12-3
Appears
Rotate [DIAL] to select the
memory channel number
Rotate [DIAL] to select